Menus

• Project bike from Ilmberger Carbon and Alpha Racing
• Technology from the WorldSBK

Ilmberger Carbon

13 photos

Ilmberger Carbon

1/13
Fine parts are built into the BMW S 1000 RR Racing project bike.

Ilmberger Carbon

2/13
For this purpose, Ilmberger Carbon and alpha Racing worked together on an S 1000 RR model year 2019.

Ilmberger Carbon

3/13
The tank cover from Ilmberger Carbon costs 379.90 euros.

Ilmberger Carbon

4/13
The seat unit in combination with the carbon rear costs 599.90 euros in the Ilmberger shop.

Ilmberger Carbon

5/13
Fairing parts are partly available as a set, but also as individual components.

Ilmberger Carbon

6/13
The fairing parts are intended to optimize the aerodynamics of the S 1000 RR.

Ilmberger Carbon

7/13
Alpha Racing takes care of the cooling management with the handmade aluminum cooler.

Ilmberger Carbon

8/13
The rear silencer comes from GPR.

Ilmberger Carbon

9/13
Ohlins also takes care of the suspension on the front wheel, brake discs come from alpha Racing, the fenders from Ilmberger Carbon.

Ilmberger Carbon

10/13
The carbon cover for the swing arm costs 199.90 euros each on the left and right.

Ilmberger Carbon

11/13
The set of four carbon paneling parts for the front and side panels and the front spoiler amounts to 1,899.89 euros.

Ilmberger Carbon

12/13
The carbon fiber parts should each be 70 percent lighter than the original components.

Ilmberger Carbon

13/13
They are covered with a clear plastic layer that is supposed to protect them from scratches.

BMW S 1000 RR Racing for the racetrack

Project bike from Ilmberger Carbon and Alpha Racing

That’s what comes out when Ilmberger Carbon and Alpha Racing work together on a 2019 BMW S 1000 RR – a project bike, refined and optimized for use on the racetrack.

There is always room for improvement. In this way, high-performance sports motorcycles can also be further optimized for the racetrack. And for that you have I.lmberger Carbon and Alpha Racing teamed up, buttoned up a BMW S 1000 RR and swapped all parts for components from their own shelves.

Technology from the WorldSBK

Alpha Racing takes care of the water and oil cooling. The hand-welded aluminum cooler weighs 4.3 kilograms and is worth 2,990 euros. Among other things, it is installed in BMW motorcycles that compete in the WorldSBK and the World Endurance Championship. Alpha Racing also contributes the multi-adjustable footrest system, which can only be used on the racetrack; it can be used with and without reverse gear (649 euros). In addition, there are the thumb brakes and the brake discs from the Alpha Racing parts shelf, which are priced between 155 and 464.10 euros. On the software side, the BMW M Race Calibration Kit from Alpha Racing is used (5,890 euros).

Ilmberger Carbon is dedicated to the aerodynamically optimized racing fairing. The range includes, for example, an air inlet duct (169.90 euros), the alternator cover (179.90 euros), a front spoiler that also serves as an underrun protection (599.90 euros), a clutch cover (199.90 euros), the tank cover (379.00 euros) 90 euros), cover for the swing arm (left and right 199.90 euros each) and a cladding set of four parts for the front and side panels and the front spoiler (1,899.89 euros). These and more components are also available separately.

70 percent lighter parts

All around, the carbon parts should each be 70 percent lighter than the original. In addition, the parts have a clear plastic coating that is supposed to protect the carbon fibers from scratches and UV rays.

But that was still not it for the BMW S 1000 RR Racing. OZ Motorbike is contributing the forged rims, the strut and fork conversion come from Ohlins and the rear silencer from GPR.

Related articles

• BMW R nineT Racer Carbon from Ilmberger Carbonparts

  Ilmberger Carbonparts 27 photos Ilmberger Carbonparts 1/27 BMW R nineT Racer Carbon from Ilmberger Carbonparts. Ilmberger Carbonparts 2/27 BMW R nineT…

• Carbon Suzuki GSX-R 1000 R from Raptik: Karbon-Gixxer from Switzerland

  Raptic. 11 images Raptik. 1/11 This Suzuki GSX-R 1000 R consists largely of carbon. Raptic. 2/11 It was built by a Swiss who …

• BMW M 1000 RR: Fully focused on racing

  New items for 2021 Motorcycle innovations 2021 BMW 28 photos BMW motorcycle 1/28 BMW brings a tightened version of the S 1000 RR under the name M 1000…

• Track test BMW HP4, Racefoxx and alpha Racing BMW S 1000 RR

  22nd photos www. 1/22 A very special test of strength: the standard BMW HP4 as a reference motorcycle against two interesting…

• BMW R nineT Black Diamond Carbon from Ilmberger

  Ilmberger Carbon 6th photos Ilmberger Carbon 1/6 Ilmberger Carbon has modified the BMW R nineT a little. Ilmberger Carbon 2/6 Most of the changes are…

• Test of BMW racing bikes BMW IDM-S 1000 RR and BMW HP4 Race

  BMW 12th photos BMW 1/12 BMW IDM-S 1000 RR and BMW HP4 Race in the test. BMW 2/12 BMW IDM-S 1000 RR. 171 kg, 200 hp. BMW 3/12 A must-have for racing…

• Honda VTR 1000 SP-1: On tour with the racing replica 160,000 km

  Frozenspeed Motorsport Photography 16 photos Frozen speed 1/16 Chris Owen with his Honda VTR 1000 SP-1. Frozen speed 2/16 Chris Owen and Sozia Gesa on…

• Honda CB 1100 R, Honda VF 1000 R in the test

  Jahn 16 photos Jahn 1/16 Athletes in tails – a comparison of the two long-distance racers from the Honda brand. Jahn 2/16 A very fine detail borrowed…

• BMW M Performance Parts: Noble accessories for the BMW S 1000 RR

  Theme special Everything about BMW Motorrad BMW 20th photos BMW 1/20 BMW charges the M forged wheels at 1,290 euros. BMW 2/20 For the carbon wheel set,…

• Unofficial design of a BMW M 1000 RR

  Nirjar Mardal 24 pictures Nirjar Mardal 1/24 The concept bike does not come from BMW Motorrad. Nirjar Mardal is responsible for this design. Nirjar …