Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion

Menus

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion

34 photos

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

1/34
The Good Ghost aka Gray Phantom is a trilogy of Kingston Custom Phantoms.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Wedemeyer

2/34
The first of the group, the White Phantom, was presented in 2016 and is based on a BMW R 80 RT.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom

3/34
In 2018 Dirk Oehlerking presented the Black Phantom, for which he used a BMW R 75.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

4/34
The largest and strongest, however, is the Gray Phantom presented in 2020.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

5/34
The BMW R 100 RS, which serves as the basis, generates 72 hp from 971 cm³ displacement.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

6/34
She will be on view with her two siblings at the Haas Moto Museum in Dallas, Texas.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

7/34
Almost everything on the Gray Phantom is handcrafted, the clip-ons are from Fehling.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

8/34
The round instruments on the full-length leather bench are all handcrafted by Kingston Custom.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

9/34
Handlebar grips made of wood and levers from Universal Oldstyle.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

10/34
Air vents on the front part of the fairing.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

11/34
In the rear, two panels can be folded out on the left and right. Right: 100 year old silver cutlery.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

12/34
The left plate presents the cutlery for the BMW – the tools.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

13/34
View of the front headlights and the left cylinder of the boxer.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

14/34
The running boards are original BMW, the rocker switch is handmade by Kingston Custom

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

15/34
The stainless steel exhaust manifolds are also handcrafted.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

16/34
They flow together harmoniously at the rear with the fairing and the rear light.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

17/34
Even the key ring is made with great attention to detail.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

18/34
The leather seat hollow was designed by Dirk Oehlerking.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

19/34
In total, the Good Ghost is 272 centimeters long.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

20/34
The builder Dirk Oehlerking with his latest work.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

21/34
The view from behind of the seat and the round instruments.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

22/34
The Gray Phantom is 112 centimeters high.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

23/34
She weighs 179 kilograms.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

24/34
As with the other two Phantoms, the bench can be folded up.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

25/34
Under the seat: spark plug, spark plug cap and space for at least one bottle of engine oil

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

26/34
Bobby Haas, founder of the Haas Moto Museum, commissioned the third Ghost.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

27/34
The design came about when Dirk Oehlerking began to build a panel with a wire frame and tape.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

28/34
He then coated them with cardboard and paste.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

29/34
This is how the design for the shell, which is made of 2 millimeters thin aluminum, came about.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

30/34
The shell weighs just 21 kilograms.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

31/34
The frame and technology of the BMW R 100 RS remained unchanged.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

32/34
The customizer only installed a monolever damper.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

33/34
An eye-catcher is the fold-up, leather-covered bench seat.

Kingston Custom Phantom Good Ghost: Impressive BMW R100RS conversion
Kingston Custom Motorcycles

34/34
The transition between seat and cockpit is therefore fluid.

Kingston Custom Phantom Good Ghost

Impressive conversion of a BMW R 100 RS

The Kingston Good Ghost as Phantom Gray turns the ensemble of Phantom White and Phantom Black into a trilogy that can be admired in the Haas Moto Museum.

Kingstom Custom, that’s Dirk Oehlerking – a creative and talented screwdriver and customizer. We already know and admire his conversions called White Phantom (2016) and Black Phantom (2018), which successfully took part in custom bike competitions. During the Gentlemen Ride Dallas TX 2019 at the Haas Moto Museum in Texas, the two Phantoms by Kingston Custom were the main attraction. Museum founder Bobby Haas and museum director Stacey Mayfield asked Dirk Oehlerking for a third phantom to turn the exiting duo into a trio.

BMW R 100 RS with 971 cc and 72 hp

Dirk Oehlerking accepted this challenge. The third in the league should be stronger and bigger than her two siblings. The White Phantom is based on a BMW R 80 RT and the Black Phantom on a BMW R 75. For the now presented "Gray Phantom" aka Good Ghost, the customizer chose a BMW R 100 RS as the basis, which generates 72 hp from 971 cm³ displacement. In the first step, Oehlerking built a paneling from a wire frame and tape, which he then coated with cardboard and paste. This is how the design for the cladding came about, which in the end consists entirely of two millimeters thin aluminum and weighs only 21 kilograms. The Gray Ghost weighs a total of 179 kilograms.


Wedemeyer

At INTERMOT 2016, the White Phantom made second place in the AMD World Champion of Custom Bike Building.

The frame and technology of the BMW R 100 RS remained untouched, the customizer only installed a monolever damper. As with the White and Black Phantom, he placed the carburettors behind the fairing, the fuel tank is also made of two millimeter thin aluminum and sits under the swing arm and the gearbox. Kingston Custom has handcrafted all parts – including the rocker switch, footbrake lever and stainless steel exhaust manifold.


Kingston Custom

For the Black Phantom, Dirk Oehlerking mainly used original BMW parts from 1951 to 1979.

Good ghost with lots of fine details

There are two fold-out panels on the right and left in the rear part of the cladding. The left plate is equipped with tools, the right one with 100-year-old silver cutlery – so it is suitable for picnics during a breakdown. As with the other two phantoms, the seat of the Good Ghost can also be folded up. Underneath are the holder that fixes the opened seat, but also the spark plug, spark plug cap and space for at least one bottle of engine oil.

Installed accessories:

  • Tires: Metzler ME 33 3.00-19 and ME77 4.00-18
  • Clip-ons: Fehling
  • Headlights: Universal
  • Taillight: old style
  • Instrument: MMB in Kingston design
  • Seat: leather Kingston design
  • Clutch and brake lever: Universal Oldstyle
  • Running boards: BMW
  • Mono damper: YSS
  • Air filter: K&N

Technical specifications:

  • Displacement: 971 cm³
  • Power: 72 hp
  • Weight: 179 kg
  • Vehicle length: 272 cm
  • Vehicle height: 112 cm

Conclusion

What a trilogy! Of course, the look is always a matter of taste, but the idea, the design and the craftsmanship win us due respect with all three Phantoms. Since three copies conclude a trilogy, we must now assume that no more Phantom will follow – which makes us extremely sad. But Dirk Oehlerking’s work will certainly be followed by other amazing conversions, which we will hopefully be able to admire live at events and trade fairs again in 2021.

Leave a Reply

Your email address will not be published. Required fields are marked *