Motorcycle transport lock from AXfix: For motorcycles with hollow axles

Posted on by admin

Table of contents

Motorcycle transport solutions

Caravans, mobile homes, trailers, transport systems

Motorcycle transport lock from AXfix: For motorcycles with hollow axles
manufacturer

Motorcycle transport lock from AXfix: For motorcycles with hollow axles

Motorcycle transport lock from AXfix: For motorcycles with hollow axles

Motorcycle transport lock from AXfix: For motorcycles with hollow axles

Motorcycle transport lock from AXfix: For motorcycles with hollow axles

5 pictures

Motorcycle transport lock from AXfix: For motorcycles with hollow axles
manufacturer

1/5
Through the hollow axles of the motorcycle, tapered screws are used to clamp the left and right cones against each other.

Motorcycle transport lock from AXfix: For motorcycles with hollow axles
manufacturer

2/5
The AXfix transport system consists of a kit for the front and rear axles, as well as four tension belts.

Motorcycle transport lock from AXfix: For motorcycles with hollow axles
manufacturer

3/5
The model-specific prices start at 219.99 euros.

Motorcycle transport lock from AXfix: For motorcycles with hollow axles
manufacturer

4/5
The AXfix transport lock is available from the accessories dealer Louis.

Motorcycle transport lock from AXfix: For motorcycles with hollow axles
manufacturer

5/5
Motorcycles should be able to be lashed faster, easier and gentler.

counselor

Motorcycle transport lock from AXfix: For motorcycles with hollow axles

Motorcycle transport lock from AXfix
For motorcycles with hollow axles

Transporting a motorcycle can be quite challenging. It should be quick and easy with the AXfix transport system that is suitable for all motorcycles with hollow axles.


Dina Dervisevic

05/15/2020

You know it: It’s best to be on the move, but every now and then it has to be piggyback – to the racetrack, to the cross-piste, over long stretches of the autobahn and sometimes, unfortunately, to the workshop. Since not all of us have the routine and equipment of a motorcycle haulier, motorcycle transport quickly turns into a tricky and lengthy undertaking.

The AXfix transport security system, which is available from Louis from EUR 219.99, is intended to provide a remedy and enable the motorcycle to be secured quickly and easily. Provided the machine has hollow axles, such as the R 1250 GS and many other BMWs, Ducatis, KTMs, Suzukis, Hondas, Yamahas, Kawasakis and MV Agustas. Due to the hollow axles of the wheel suspension, cones that are individually tailored to the motorcycle are braced against each other. This is done using toggle screws, which then serve as fixed points for the tension belts. The lashing straps are included in the scope of delivery. Since the motorcycle is only braced against the tires, the spring elements can move freely and are not unnecessarily stressed.

AXfix motorcycle transport system from 219.99 euros

In addition, there is no longer any need to search for suitable holding points, there is no more fiddling with the tensioning straps, damage to the paintwork is a thing of the past – at least the one that would have been caused by lashing. Only the tires provide the necessary elastic tension. “At the destination, the system is just as quickly dismantled.”, according to the manufacturer.


Motorcycle transport lock from AXfix: For motorcycles with hollow axles


manufacturer

The AXfix transport lock can be used on any motorcycle with hollow axles, including cardan and single-sided swing arms.

The AXfix transport system consists of a kit for the front and rear axles, as well as four tension belts. “You don’t need more to lash your vehicle securely on the trailer or in the transporter.”, according to the manufacturer’s note. The model-specific prices of the transport security system made in Germany start at 219.99 euros.

Features and requirements at a glance:

  • allows the bike to be unhitched without having to pull it into the suspension elements. It is only stretched in the tire
  • no risk of damage to the chassis, frame parts and handlebars
  • can be used on any motorcycle with hollow axles, including cardan and single-sided swing arms
  • Shafts made of special steel for high tensile and flexural strength
  • hardened clamping cone for high wear resistance
  • Hard chrome-plated cone for perfect rust protection
  • simple and space-saving lashing, clamping angle up to 0 degrees
  • no re-tensioning necessary while driving
  • no damage to the cladding parts from abrasive belts
  • no dangerous jamming of cables, trains or lines

Leave a Reply

Your email address will not be published. Required fields are marked *