Menus

• Mahogany power boats as inspiration

Chute

26th photos

Chute

1/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

2/26
… Conti RaceAttack Custom tires, front 90/90 H 21, rear 120/70 ZR 19, …

Chute

3/26
… Minimal electrics from Motogadget with its own wiring harness, speedometer MST Speedster, K & N Air filter instead of air filter box, everything entered.

Chute

4/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

5/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

6/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

7/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

8/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

9/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

10/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

11/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

12/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

13/26
… Spoked wheels with aluminum rims and drum brakes (duplex front), front 21 x 2.15 inches, rear 19 x 3.00 inches, …

Chute

14/26
Changes: rear frame welded around with self-supporting stainless steel tank, monocoque and front fender made of high-gloss lacquered mahogany thick veneer (14 layers), …

Chute

15/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Chute

16/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, …

Chute

17/26
… large wheels and unique details hardly reveals the descent from the good Honda CB 400 N..

Chute

18/26
The perfect wave: the 14 layers of thick mahogany veneer were glued together using a veneer press. The white lacquered fiberglass side panels are laminated by hand.

Chute

19/26
Shortened rear frame with self-supporting stainless steel tank …

Chute

20/26
… and airbrush motif.

Chute

21/26
True to style: The handles – like the footrests and hand levers – are wrapped in sail trim lines.

Chute

22/26
Harmonious line: The 19 and 21 inch wheels emphasize the extremely slim stature of the Honda “Sailor”.

Chute

23/26
Setting signals instead of sails: Captain Rudolf Schutte in matching gear on his conversion.

Chute

24/26
An anchor is of course part of the maritime presentation. Or do the drum brakes need its support?

Chute

25/26
Starting basis: Honda CB 400 N with air-cooled two-cylinder four-stroke engine, output 31 kW (43 PS) at 8500 rpm (left original).

Chute

26/26
The “Sailor” is a motorcycle conversion by Rudolf Schutte with a lively tank-seat line, large wheels and unique details that hardly reveals the descent from the good Honda CB 400 N..

Reader conversion "Sailor" Honda CB 400 N

Mahogany power boats as inspiration

Content of

With the “Sailor”, Rudolf Schutte has launched an extraordinary conversion that, with its sweeping tank-seat line, large wheels and unique details, hardly reveals the descent from the good Honda CB 400 N. He was inspired by the noble mahogany power boats from Riva.

VMaybe Rudolf Schutte let himself be guided by these maritime influences when he converted his first motorcycle, because he always swims against the current in his job. As a successful developer and prototype builder for international designer furniture manufacturers, he prefers to set trends than to follow them. So the retro fan has little interest in the common wide-roll madness in the custom scene. “I wanted to build a very narrow and flat-looking motorcycle with a flowing wave that runs across the entire bike. And do as much as possible yourself. “

Buy complete article

Reader conversion "Sailor" Honda CB 400 N
Mahogany power boats as inspiration

CB 400 N to give a fresh swing. As with the famous Riva boats, the “wooden deck” of his conversion is made of mahogany, with “hull panels” made of GRP, which were laminated onto negative molds that he made himself. For the sensational monocoque, Schutte glued 14 layers of thick veneer of the noble wood, which was then pressed into shape for many hours with around two tons on a veneer press with the help of a template made from MDF panels.

Then he cut out the final shape, sanded it down and covered it with a special boat varnish. The precious wood was then sanded and varnished twelve more times until it had the desired pore-deep surface, “which creates an impressive depth effect, as if you had placed a pane of glass on it”.

Speaking of impressing: Rudolf Schutte also had to ask the responsible TÜV engineer. And less with optical finesse, but rather with his technical skills. The aim from the start was that the “Sailor” would receive the coveted plaque so that she could leave the local port with the blessing of the authorities. Not an easy undertaking with such a far-reaching conversion that even required the rear frame to be welded around to make space for the self-supporting stainless steel tank provided here. In the end, Schutte had the approximately eight-liter fuel tank with integrated overflow chamber and fuel pump welded by a professional, but he made the cardboard templates for the V4A sheets and the styrofoam model himself.

Every single step of the renovation was discussed in advance on the basis of detailed drawings “with the strict, but also very competent and helpful expert”. He nodded a lot, but occasionally used his veto. For example, with the planned extension of the swing arm, which would have been necessary in order to also be able to install a 21-inch spoked wheel at the rear. Now a specially made 19-inch model rotates aft, soled with a 120-inch RaceAttack Custom from Conti, which, despite its intended use as the front tire, does not impair the “amazingly good handling”.

The TÜV specialist also insisted on a recognizable seat cushion. The builder met this requirement with a 15 millimeter thick leather cover without interrupting the elegant lines of the monocoque. Since the recreational screwdriver was in no hurry with his first work, he carefully took care of the details, made both the fittings (made of square aluminum and bell switch) and the wiring harness itself. With correct lighting, the front wooden fender and a passed noise certificate (open air filter !) the full acceptance by the TÜV experts, who had been inaugurated in every detail, was then just a matter of form. “Captain” Rudolf Schutte is now officially allowed to swim in traffic with his nicely decked out Honda “Sailor”.

Related articles

• Honda VFR 750 RC36 conversion by Rebikeling

  rebikeling.ch 14th photos rebikeling.ch 1/14 This Honda VFR 750 was based on the 1972 Daytona racing machine used by Dick Man and Ralph Brians from the…

• Moto CRD 62 Honda NX 650 Dominator Cafe Racer conversion

  Cafe Racer Dreams. 7 images Cafe Racer Dreams. 1/7 This conversion is based on a Honda NX 650 Dominator from 1990. Cafe Racer Dreams. 2/7 was built …

• Louis conversion Honda Dominator

  Louis 18 pictures Louis 1/18 Louis conversion Honda Dominator. Louis 2/18 Kay Blanke (left) and Detlef Studemann. Louis 3/18 Such conversions are the freestyle …

• Honda NX 650 Dominator “No. 35 “: Scrambler conversion from HB-Custom

  Holger Breuer (HB-Custom). 8th photos Holger Breuer (HB-Custom). 1/8 This bike was originally a Honda Dominator. Holger Breuer (HB-Custom). 2/8 The…

• Scene: Ducati 350 M3 Desmo reader conversion

  Tub 16 photos Tub 1/16 … which after all its optimizations was allowed to make just 700 kilometers. Tub 2/16 … and also replaced small parts such as…

• Presentation: The Honda CB Seven Fifty conversion from Louis

  Louis 21 pictures Louis 1/21 Master Guido welds what the burner has to offer. Louis 2/21 main stands are something for chain care wimps. Louis 3/21 …

• Triumph Trident Cafe Racer reader conversion

  Thomas Degree 10 photos Thomas Degree 1/10 Triumph Trident Cafe Racer Thomas Degree 2/10 The handlebar fittings milled from aluminum by Motogadget look…

• Single cylinder in comparison: Honda XBR 500 and Yamaha SRX 6

  Bilski On the move: Honda XBR 500 and Yamaha SRX 6 single-cylinder in comparison: Honda XBR 500 and Yamaha SRX 6 Contents of Is less motorcycle more fun? …

• Test BMW R 1150 GS against Honda Varadero

  BMW R 1150 GS Comparison test, BMW R 1150 GS, Honda Varadero 1000, Honda XRV 1000 Desertstorm BMW R 1150 GS against Honda Varadero Enthroned at a lofty…

• On the move: Benelli 750 Sei, Honda CBX 1000, Kawasaki Z 1300

  Bilski 17th photos Bilski 1/17 Who is the widest in the whole country? The angle of spread of the driver’s legs provide information. Bilski 2/17 With…