Bimota 800 TESI 3D RaceCafe 2016

Menus

The neo-retro being in tune with the times, even an elitist manufacturer like Bimota could not let this fashion pass without infusing it into some model. It is the TESI 3D, the most unique machine of the brand, which was chosen to illustrate this trend.. The result is as appealing as a Lazareth creation embedded in a BCBG scooter convention. The TESI 3D RaceCafe pushes daring to its ultimate frontiers.

Refined rear, expressive front bordering on brutal, compact and cut size from which two tubular growths escape – This cafe racer is a UFO in its category. Exuberance is at its peak. Especially with its unique frame: two aluminum plates cut in the mass and strongly perforated constitute an Omega structure. At its ends are anchored two tubular trellis oscillating arms. The rear already striking by its shape appears almost classic in comparison to the gas plant of which the front axle is composed. Another tubular trellis holding a directional hub in its pognes. A set of tie-rods to link that to a phantom steering column and here you are with one of the most surreal motorcycles in production. The complex linkage forced the brake calipers to end up facing south. A staggering situation, it is the case to say it, for these superb one-piece Brembo radially fixed. Add to that a whole lot of beautiful machined parts, Ohlins suspensions, a set of lightweight OZ racing rims, a polished finish and you will understand why Bimota charges this machine at an exorbitant price. Return to the front suspension for a moment and notice the eccentric connecting the arm to the shock absorber. A similar element conditions the rear, the duo allowing to play on the height of the motorcycle with an amplitude of more or less 23 mm.

Motorization side, on the other hand, it is difficult to express real enthusiasm. Chosen from the Ducati organ bank, the twin still has a good face, but does its generation have its place in such a technical part-cycle. But above all, its power is totally unworthy of such a machine. The BB3 has an S 1000 RR engine, the DB8 is stuffed with the boiler of the 1198, the brand has even shown that it can hang on to madness with its DB11 VLX equipped with a compressor. And there, on the Tesi 3D RaceCafe, the pilot will be dealing with an 803 cm3 air-cooled with 2 valves per cylinder. From the Scrambler, the mechanics gain a handful of nags to display 80 horsepower. But why not have kept the 1100? And to think that the first Tesi could receive the engine of the Superbike 851; or a version inflated to 904 cm3 and 113 hp … OK, I quit.

Showing only 165 kilograms dry, the Tesi RC pushes the vice to the option of offering a carbon version of its swingarms. It is then 3 kilos which fly away. Like the price.
Exceptional technologically and disappointing on the engine side, the Bimota Tesi 3D RaceCafe surprises and clashes. A collector’s item, a whim, an expression of faith.

What you must remember

Themore

    Theless

      Prices

      34 160

      Price
      nine
      Compare
      the credits

      Make
      yourBimota 800 TESI 3D RaceCafe 2016

      Estimate, calculate and compare the cost of insuring your motorcycle.
      Calculate the cost of
      insurance
      Test the price of the motorcycle insurance specialist

      Opinion





      on 0 opinion
      users
      Read the reviews


      Model marketed in

      2016

      Performances

      • Max speed:
        about 200 km / h

      The technical aspect

      Bimota 800 TESI 3D RaceCafe 2016

      • Frame
      • Frame: Omega type aluminum
      • Tank: 16 liters
      • Seat height: 780 mm
      • Length: 2,100 mm
      • Width: 700 mm
      • Height: 1,100 mm
      • Wheelbase: 1390 mm
      • Dry weight: 165 kg
      • Train before
      • swingarm, tubular trellis structure, Ohlins shock absorber
      • 2 discs Ø 320mm, Brembo monobloc 4 piston radial calipers
      • Front wheel:

        120/70
        – 17

      Bimota 800 TESI 3D RaceCafe 2016 technical

      • Transmission
      • 6-speed gearbox
      • Secondary chain transmission
      • Rear axle
      • Ohlins single shock absorber
      • 1 disc Ø 220 mm, 2 piston caliper
      • Rear wheel:

        180 – 190 – 200/55
        – 17

      • Motor
      • Twin cylinder
        in L at 90 °
        , 4 stroke
      • Cooling: Air cooling
      • Injection Ø nc
      • simple desmodromic ACT
      • 2 valves per cylinder
      • 803 cc
        (88 x 6 mm mm)
      • 80
        ch
      • Weight ratio /
        power
        : 2.06
        kg / hp
      • Compression: 11: 1
      • Crit’air:

      Detached pieces

      exhaust
      motor
      fluid
      electricity

      filtration
      braking
      chain kit

      Competitors

      Avinton Collector Roadster 2015
      Avinton Collector Roadster 2015

      Bimota 800 TESI 3D RaceCafe 2016

      Bimota 800 TESI 3D RaceCafe 2016

      Bimota 800 TESI 3D RaceCafe 2016

      Bimota 800 TESI 3D RaceCafe 2016

      Bimota 800 TESI 3D RaceCafe 2016

      Bimota 800 TESI 3D RaceCafe 2016

      Bimota 800 TESI 3D RaceCafe 2016

      • Bimota 1000 TESI 2D 2006

        Rarely has the motorcycle industry produced such an amazing machine for us. Is there an even more amazing machine? The Munch Mammut? No, not even….

      • Bimota 1000 TESI 2D 2007

        Rarely has the motorcycle industry produced such an amazing machine for us. Is there an even more amazing machine? The Munch Mammut? No, not even….

      • Bimota 1100 TESI 3D Evo 2014

        Some manufacturers are guided by a single imperative: performance. Others by design, some by originality. Bimota speaks out on another ground:…

      • Bimota 1100 TESI 3D 2009

        Some manufacturers are guided by a single imperative: performance. Others by design, some by originality. Bimota speaks out on another ground:…

      • Bimota 1100 TESI 3D 2007

        Some manufacturers are guided by a single imperative: performance. Others by design, some by originality. Bimota speaks out on another ground:…

      • Bimota 1000 TESI 2D 2005

        Rarely has the motorcycle industry produced such an amazing machine for us. Is there an even more amazing machine? The Munch Mammut? No, not even….

      • Bimota 1100 TESI 3D Evo Naked 2016

        Some manufacturers are guided by a single imperative: performance. Others by design, some by originality. Bimota speaks out on another ground:…

      • Bimota 1100 TESI 3D 2012

        Some manufacturers are guided by a single imperative: performance. Others by design, some by originality. Bimota speaks out on another ground:…

      • Bimota 1000 TESI H2 2020

        It could have been called KB4; it chose a more symbolic name: that of the alliance between a surrealist chassis and a breathtaking engine. The Tesi H2 is…

      • Bimota 1100 TESI 3D 2011

        Some manufacturers are guided by a single imperative: performance. Others by design, some by originality. Bimota speaks out on another ground:…

      Leave a Reply

      Your email address will not be published. Required fields are marked *