Company portrait LS2

Table of contents

Company portrait LS2
wolf

Company portrait LS2

Company portrait LS2

Company portrait LS2

Company portrait LS2

27 pictures

Company portrait LS2
Stefan Wolf

1/27
An on-site visit at the Chinese company LS2 reveals why Asians are so far ahead in the industry.

Company portrait LS2
Stefan Wolf

2/27
In the green area: administration (center) and production halls (in the background) on a tropical 270,000 m².

Company portrait LS2
Stefan Wolf

3/27
The design department works with software developed in-house. Around 20% of the 1,400 employees do development and organizational tasks.

Company portrait LS2
Stefan Wolf

4/27
Manual work, if it works faster and cheaper than with a machine. Yang Li Fei (42) brings visor seals into shape.

Company portrait LS2
Stefan Wolf

5/27
Injection molded, themorplastic helmet shells require little rework. Xian Han Ding (45) cuts off the spray flash.

Company portrait LS2
Stefan Wolf

6/27
Pang Zhen (50), longest-serving LS2 employee, in front of one of 45 (!) Injection molding machines in which a helmet shell is made from granulate at 260 degrees.

Company portrait LS2
Stefan Wolf

7/27
Ten employees take care of the prepack preparation for the thermoset trays.

Company portrait LS2
Stefan Wolf

8/27
The prepacks come in a steel mold, a balloon presses them firmly, and after just under twelve minutes at 170 degrees, Ma Jun (42) removes the fiberglass shell (right).

Company portrait LS2
Stefan Wolf

9/27
Helmet shells always have to be reworked, thermoplastic significantly less than thermoset. Han Tianfa (30) deburrs ABS shells here.

Company portrait LS2
Stefan Wolf

10/27
The two robots from Xiong Peng (28) remove larger parts with water jet cutters.

Company portrait LS2
Stefan Wolf

11/27
And this is what the elaborate handwork in finishing looks like. Li Yong (28) smooths out small bumps.

Company portrait LS2
Stefan Wolf

12/27
Every day 6,000 to 8,000 new helmet shells end up in the interim storage facility and wait there for painting and subsequent completion.

Company portrait LS2
Stefan Wolf

13/27
Lunch is served from 11.20 a.m. to 12.30 p.m. In a relaxed single file and with sun protection to the canteen.

Company portrait LS2
Stefan Wolf

14/27
The output switches differ according to the degree of severity: normal, medium and heavy.

Company portrait LS2
Stefan Wolf

15/27
The canteen is air-conditioned because the average temperature in August is 30 degrees.

Company portrait LS2
Stefan Wolf

16/27
Around 30 employees work in the manual painting area; the professionals only need 20 to 30 seconds for a helmet.

Company portrait LS2
Stefan Wolf

17/27
Just a few meters away, it looks like a spaceship. Here it goes through an air lock for chrome plating.

Company portrait LS2
Stefan Wolf

18/27
LS2 prints all water decals itself.

Company portrait LS2
Stefan Wolf

19/27
Yen de Hui (34) needs a maximum of 20 minutes per helmet decoration.

Company portrait LS2
Stefan Wolf

20/27
He Wei (40) uses German machines to manufacture the shock-absorbing inner shell (EPS) from foamed polystyrene beads.

Company portrait LS2
Stefan Wolf

21/27
Liu Yi (27) produces visors on injection molding machines. 30 seconds, 300 degrees – done!

Company portrait LS2
Stefan Wolf

22/27
This is what it looks like in the sewing room where the interior fittings are created. 306 employees work here six days a week from 7.30 a.m. to 5.30 p.m. including a 1.5 hour lunch break.

Company portrait LS2
Stefan Wolf

23/27
The monthly salary leaderboard reveals a record 8,308 yuan (1063 euros), the average is 4800 yuan (615 euros).

Company portrait LS2
Stefan Wolf

24/27
Counting every small part? Three digits! LS2 does almost everything itself.

Company portrait LS2
Stefan Wolf

25/27
After final assembly and quality control, it goes, among other things, to the European warehouse in Barcelona.

Company portrait LS2
Stefan Wolf

26/27
1300 employees live in the company dormitory. The offer ranges from four-bed migrant study rooms to family two-room apartments.

Company portrait LS2
Stefan Wolf

27/27
The charismatic Arthur Liao (seated in the center of the picture) is the founder and head of the family business.

clothing

Helmets

Company portrait LS2

Company portrait LS2
The Chinese number one

High quality motorcycle helmets from China? Almost unthinkable for seasoned German bikers 15 years ago. But now the Asians are playing very well in the industry. An on-site visit at LS2, the Chinese number one, reveals why this is the case.

Klaus Herder

07.12.2017

History repeats itself: at the end of the 19th century, the English parliament felt compelled to protect the domestic economy from cheap and supposedly inferior exports. The result was a law called “Merchandise Marks Act”. From now on the indication “Made in Germany” discourage customers from buying. The further course is known: The designation of origin, intended as a warning, has been transformed into a seal of quality.

Buy complete article

Company portrait LS2

Company portrait LS2
The Chinese number one

6 pages) as PDF

€ 2.00

Buy now

What we do with the name “Made in china” would be. For some motorcyclists, this is still an exclusion criterion when it comes to purchasing clothing and accessories. For the same people, by the way, who use a smartphone and camera that were assembled in China. However, our attitude towards Chinese products is sometimes a bit irrational. And the old merchant adage still applies that if you order something cheap, you also get something cheap. But it works the other way around, also and especially in China. The MOTORRAD editorial team is always aware of this when you can follow product tests to see how a brand is developing. For example, the largest Chinese helmet manufacturer LS2, which even won the title “world’s largest motorcycle helmet manufacturer” plays along.

Just a few years ago, the common motorcyclist took note of the LS2 helmets at best as a cheap by-catch in the Hein Gericke shop. In the meantime, the family company’s products can even be found at well-known BMW dealers and have achieved impressive results in MOTORRAD helmet tests. Most recently in issue 21/2017, in which an LS2 flip-up helmet with the judgment “Good” landed on the fourth of twelve places and relaxed it with a little less weight and volume “very good” would have been enough. In order to understand the LS2 success story, MOTORRAD visited the company based in the southern Chinese town of Heshan (around 500,000 inhabitants!) And took a closer look at helmet production, an unconventional mixture of the most modern and quite archaic production methods. High-tech is used wherever the use of state-of-the-art machines and raw materials from the West makes sense. And wherever fairly solid manual work leads to the goal, this is precisely what is used. In short: everything is extremely pragmatic. In combination with a pronounced vertical range of manufacture, ultra-fast development times and a high degree of flexibility, the result is what is now also a major image change for helmets “Made in china” contributes.

numbers, data, facts

LS2 stands for “Liao system 2”, was introduced as a helmet brand in 2006 and began sales in Europe in 2008 via the Barcelona-based European headquarters (Tech Design Team). Company founder Arthur Liao (50) started manufacturing helmets for the domestic market in 1990. The LS2 helmets are made by “Jiangmen Pengcheng Helmets Ltd.” in Heshan, around 70 kilometers southwest of Guangzhou (“Canton”) produced. Around 1400 employees manufacture up to 8000 helmets per day. Sales in Germany are overflowing LS2 Germany.
Tel. 0 44 51/9 60 29 80
www.ls2helmets.com

  • Interview with HJC company founder Wan Kee Hong

    Yamaha Sports & scene Interview with HJC company founder Wan Kee Hong Interview with HJC company founder Wan Kee Hong “Koreans are extremely innovative…

  • Company report Benelli

    Benelli 14th pictures Benelli 1/14 Benelli has been part of the QJ Group since 2005. Benelli 2/14 Benelli also offers helmets. Benelli 3/14 About ten…

  • Company portrait Shoei

    Shoei Japan 10 pictures Shoei Japan 1/10 This is how a Shoei helmet is made. Shoei Japan 2/10 All overhangs that have arisen during production are…

  • Wunderlich in the company profile

    Whimsical 9 pictures Whimsical 1/9 Whimsical 2/9 Whimsical 3/9 Whimsical 4/9 Whimsical 5/9 Whimsical 6/9 Whimsical 7/9 Whimsical 8/9 Whimsical 9/9…

  • Out and about: Portrait of Touratech

    Touratech Sports & scene Out and about: Portrait of Touratech Out and about: Portrait of Touratech The Touratech managers and their company The…

  • Portrait Pinstriper Skratch

    Blacksmith 11 pictures Thomas Schmieder 1/11 Wendy Newton needs personalized head protection, Skratch designs the decor. Thomas Schmieder 2/11 Skratch is…

  • Portrait: Lino Dainese

    Gori counselor technology & future Portrait: Lino Dainese Interview: Lino Dainese “I want to measure the adrenaline” Who invented it? No, for once not…

  • Company portrait boxer

    motorcycles Company portrait boxer Company portrait boxer Training camp From a tuning company to an independent design forge, the Boxer company has…

  • Swabian leather in a portrait

    Orth 11 pictures Michael Orth 1/11 Claus Hammer personally delivered the first made-to-measure Swabian leather suit in October 1978. He leads, shapes and…

  • Touratech in the company profile

    Touratech 9 pictures Touratech 1/9 Touratech 2/9 Touratech 3/9 Touratech founder Herbert Schwarz. Touratech 4/9 Touratech 5/9 Touratech 6/9 Touratech 7/9…

Leave a Reply

Your email address will not be published. Required fields are marked *