GOC Yamaha Niken Custom: Tricycle pulls absolutely bare

Yamaha Niken GOC Custom
Game Over Cycles

Yamaha Niken GOC Custom

Yamaha Niken GOC Custom

Yamaha Niken GOC Custom

Yamaha Niken GOC Custom

15th photos

Yamaha Niken GOC Custom
Game Over Cycles

1/15
The customizers from Game Over Cycles presented a modified Yamaha Niken at the custom bike show in Bad Salzuflen.

Yamaha Niken GOC Custom
Game Over Cycles

2/15
It also relies on bare aluminum.

Yamaha Niken GOC Custom
Game Over Cycles

3/15
The custom bike was developed in cooperation with Yamaha Poland.

Yamaha Niken GOC Custom
Game Over Cycles

4/15
First the tricycle was stripped of all plastic panels.

Yamaha Niken GOC Custom
Game Over Cycles

5/15
The spare parts were formed from hand-wrought aluminum.

Yamaha Niken GOC Custom
Game Over Cycles

6/15
The aluminum lamp mask was fitted with new headlight elements.

Yamaha Niken GOC Custom
Game Over Cycles

7/15
The mirror and hand guards were molded in one piece.

Yamaha Niken GOC Custom
Game Over Cycles

8/15
Game Over Cycles was immortalized in various cover caps.

Yamaha Niken GOC Custom
Game Over Cycles

9/15
The cooler bears various Japanese characters.

Yamaha Niken GOC Custom
Game Over Cycles

10/15
Game Over also on the engine case cover.

Yamaha Niken GOC Custom
Game Over Cycles

11/15
Glossy tailpipe cover for the Akrapovic exhaust.

Yamaha Niken GOC Custom
Game Over Cycles

12/15
Various aluminum components were polished bright.

Yamaha Niken GOC Custom
Game Over Cycles

13/15
Shiny aluminum down to the smallest corner.

Yamaha Niken GOC Custom
Game Over Cycles

14/15
Tank and ignition lock cover made of aluminum. Open air filters for the three-cylinder.

Yamaha Niken GOC Custom
Game Over Cycles

15/15
The wheel hubs have conical aluminum tips.

GOC Yamaha Niken Custom

Tricycle pulls absolutely bare

The Polish customizers of Game Over Cycles (GOC) presented a modified Yamaha Niken at the custom bike show in Bad Salzuflen. They also rely on bare aluminum.

The Yamaha Niken is already in its basic design a motorcycle that attracts attention. What the customizers from GOC showed at the custom bike trade fair continued to attract increased attention.

Aluminum cladding

In cooperation with Yamaha Poland, GOC converted a Yamaha Niken into a show bike. First of all, all plastic panels were removed from the tricycle. The spare parts were formed from hand-wrought aluminum. The tank cover, the lamp mask with new headlights, the seat, the radiator panels and the front fenders were replaced. Yes, even the hand protectors were copied from aluminum sheet together with the mirrors. Because of the optics, of course, all new parts remained bare. The biggest challenge was to create a spectacular look without interfering with the tilt technique.

Everything has been polished

In addition, almost all other aluminum components on the Niken have been polished to a high gloss. There were also various new aluminum covers, for example on the fork, the motor housing covers or the wheel hubs. The grille was upgraded with Japanese characters. GOC relies on Akrapovic for the exhaust.

The bottom line is that the Polish GOC team secured the title “Craziest Bike” with the Niken Custom at the fair..

Related articles

Leave a Reply

Your email address will not be published. Required fields are marked *