MotoGP – Moto GP: Ducati debauchery Aprilia WSBK team manager –

Posted on by admin

Driving report: Horex VR6 Roadster

Pre-production copy of the six-cylinder Horex

No real V-engine, certainly not an in-line engine, but three camshafts: the Horex VR6 Roadster is idiosyncratic, independent, peculiar. MOTORRAD was allowed to try out a pre-production copy of the six-cylinder.

It hums, hisses, growls, barks, screeches – the tonal spectrum of the VR six-cylinder with its uneven firing intervals offers, depending on the engine speed and load, almost indescribable facets of sound. Tea Horex is alive, provides plenty of spectacle – and it finally leaves after a long wait. The small, Augsburg-based manufacturer now invited to the former airport in Neuhausen ob Eck for a first driving experience, where for the first time external drivers could convince themselves of the handling qualities of the roadster on a specially constructed course. And the fantastic road network in the Swabian Alb offered the opportunity to test the potential and potential of the six-cylinder.

Driving report: Horex VR6 Roadster

Pre-production copy of the six-cylinder Horex

jkuenstle.de

The six-cylinder chunk moves on the country road with astonishing elegance.

On the other hand, the chassis is all the more enjoyable. In contrast to the handling course, the Horex looks light-footed at accelerated country road speeds, and maintains a precise course even in the most demanding curve combinations. Fascinating how easy it can make a finely tuned landing gear for the helmsman. Even in nasty tight curves you can easily correct the line, not least thanks to the perfectly harmonizing Metzeler Roadtec Z8 in the current M / O specification. At the same time, the roadster is full of impeccable stability on the road.

The suspension leaves a similarly convincing impression. With a lot of progression and not excessively hard-tuned, the WP elements respond sensitively to small bumps. And the Horex drives pretty weird too. In order to put the side stand on the left, you have to angled it a lot. So there is hardly any need for optimization with the chassis, while the technicians – with regard to engine tuning and workmanship – will probably still have a few night shifts – so that the Horex Roadster can still be delivered in August as planned.

Technical specifications

jkuenstle.de

The intertwined exhaust system has two separate exhaust lines with catalytic converters for three cylinders each.

engine
Water-cooled six-cylinder VR engine, three overhead, chain-driven camshafts, three valves per cylinder, bucket tappets, injection, Ø 34 mm, hydraulically operated multi-disc oil bath clutch, six-speed gearbox, O-ring chain, secondary ratio 2.47.
Bore x stroke 68.0 x 55.0 mm
Cubic capacity 1218 cm3
Compression ratio 12.5: 1
rated capacity 118.0 kW (161 hp) at 8800 rpm
Max. Torque 137 Nm at 6800 rpm

landing gear
Bridge frame made of cast aluminum parts with screwed-on steering head assembly made of steel tubes, upside-down fork, Ø 48 mm, adjustable spring base, rebound and compression damping, single-sided swing arm made of aluminum, central spring strut with lever system, adjustable spring base, rebound and compression damping, double disc brake at the front, Ø 320 mm, four-piston fixed calipers, rear disc brake, Ø 264 mm, two-piston fixed calipers, ABS.
Forged aluminum wheels 3.50 x 17; 6.00 x 17
Tires 120/70 ZR 17; 190/55 ZR 17

Dimensions + weights
Wheelbase 1500 mm, steering head angle 66.0 degrees, caster 95 mm, spring travel f / r 120/120 mm, seat height 800-840 mm, weight * 249 kg, tank capacity / reserve 17/4 liters.
Price including additional costs 21,700 euros

Related articles

Related articles

Leave a Reply

Your email address will not be published. Required fields are marked *