BMW HP4 Race Performance Price Availability

Posted on 22.10.2015 by admin

BMW HP4 Race model presentation

171 kilograms, 215 hp, 750 pieces

The Bavarian carbon athlete BMW HP4 Race weighs in at just 171 kilograms – that’s less than the current works racer in the Superbike World Championship!

The BMW HP4 Race’s good – and its developers probably had a lot of fun. Because it doesn’t care about Euro 4 or any other standard – it is designed exclusively for the racetrack. That’s why it comes from the factory with the reverse gearshift pattern – that is, first gear up, all others are engaged by stepping down. Various pinions and sprockets are also included ex works.

With a full tank of fuel ready to drive, it should weigh in at just 171 kilograms and deliver 215 hp at 13,900 rpm. That is 16 hp more than the street-legal BMW S 1000 RR. The maximum torque of 120 Nm is available at 10,000 rpm (S 1000 RR: 113 Nm at 10,500 rpm). The racing engine developed for the Superbike and Endurance World Championships serves as the basis. The maximum speed has also been increased for the BMW HP4 Race: from 14,200 to 14,500.

Video HP4 Race at EICMA

Price for the BMW HP4 Race: 80,000 euros

The carbon sports car will be available from September 2017, albeit in limited numbers: 750 of the BMW HP4 Race will be produced and cost 80,000 euros. Instead, there is a thoroughbred racetrack motorcycle with a monocoque carbon frame and carbon wheels, Ohlins spring elements (identical in construction to those from the SBK World Championships and MotoGP), swing arms from the SBK World Championships, Brembo monobloc brake calipers of the GP4 PR type, Titanium pistons, one-piece aluminum calipers, 6.75 mm thick 320-millimeter T-type racing steel brake discs and all electronic driver assistance systems (DTC, EBR, wheelie control, pit lane limiter, launch control).

Like the frame and wheels, the trim parts of the BMW HP4 Race are made of carbon, the tank is made of hand-brushed aluminum. The entire vehicle, as well as the engine, is handmade in Berlin.

You can read the details of the modified engine of the BMW HP4 Race in MOTORRAD issue 10, from April 28, 2017 at the kiosk or as a PDF for download here:

MOTORRAD issues as PDF for download

BMW HP4 Race at a glance (manufacturer information)

Carbon main frame in monocoque construction; Weight: 7.8 kilograms
Self-supporting carbon frame rear, height adjustable in three positions.
Carbon wheels (weight reduction approx. 30 percent compared to light alloy forged wheels)
Ohlins upside-down fork type FGR 300
Ohlins shock absorber type TTX 36 GP
Brembo monobloc brake calipers type GP4 PR in connection with 320 T-Type racing steel brake discs (thickness: 6.75 mm) at the front
Racing engine at World Cup level with an output of 158 kW (215 PS) at 13,900 rpm and a max. Torque of 120 Nm at 10,000 rpm
Racing gearbox with adapted gear ratios
Weight-optimized electrics with lithium-ion battery with 5 Ah
2D dashboard and 2D recording including logger
Dynamic traction control DTC (gear-selective programmable in 15 stages)
Engine Brake EBR (programmable gear-selective in 15 stages)
Wheelie Control (programmable gear-selective)
Launch Control
Pit lane limit
Trim parts made of carbon with quick-release fasteners
Paintwork in BMW HP Motorsport colors
Factory production in Berlin of 750 units

6th Pictures

Images: BMW HP4 Race model presentation

To home page

Schumann

Technical specifications

Bmw

Engine:

Displacement: 999 cm³
Bore / stroke: 80 / 49.7 mm
Output: 158/215 kW / PS (at 13,900 rpm)
Max. Torque: 120 Nm (at 10,000 rpm)
Design: water-cooled inline four-cylinder engine
Compression / fuel: 13.7-13.9: 1 / min
Valve / gas control: DOHC (double overhead camshaft), valve actuation via single rocker arm
Valves per cylinder: 4
Ø inlet / outlet: 33.5 / 27.2 mm
Throttle valve diameter: 48 mm

Power transmission gear:

Clutch Multi-plate anti-hopping oil bath clutch, mechanically operated
Transmission Claw-shifted 6-speed racing transmission (EVO) with straight teeth (gear 1, 2, 4, 5, 6 optimized)
Primary ratio: 1.652
Gear ratio gear steps: I 2.388; II 2,000; III 1.727; IV 1.545; V 1,400; VI 1.291
Rear wheel drive: chain
Translation: 2,647
Traction control: DTC can be set to 15 levels
Motor brake EBR: 15-stage adjustable

Landing gear:

Carbon monocoque RTM frame with steering head angle and swing arm pivot adjustment, engine supporting
Front wheel guidance: Ohlins FGR 300 WSBK fork, adjustable rebound and compression damping, adjustable spring preload, adjustable Ohlins steering damper SD052, quick-change system for the front wheel thanks to rotatable fork feet with the front fender installed (brake calipers do not have to be removed to change the wheel)
Rear wheel guide aluminum double-arm swing arm Ohlins TTX 36 GP central spring strut, adjustable rebound and compression damping, adjustable spring preload, adjustable spring strut pivot point at the top (0/3 mm), adjustable spring strut deflection (tension strut length ), contact surfaces for wheel spacer bushing on chain tensioners for easy / hands-free wheel mounting, titanium -Chain tensioner outside, inside aluminum, CFRP assembly stand mounts on swing arm
Suspension travel front / rear: 130/120 mm
Trail: 102.5 mm (adjustable from 95-112)
Wheelbase: 1,440 mm
Steering head angle: 65.5 ° (adjustable 0.0 °, + -0.5 °, + -1 °)
Strut tension: 113 mm (adjustable variable + – 5mm)
Arm length: 604 mm
Triple offset clamp: 30 mm (adjustable 26 mm, 28 mm, 32 mm)
Wheels: carbon wheels incl. Firmly pressed wheel spacers for easy wheel mounting
Rim dimensions front / rear: 3.50 x 17" / 6.00 x 17"
Front tire: 120/70 ZR 17 Pirelli Diabolo Superbike Slick SC2
Rear tire: 200/60 ZR 17 Pirelli Diabolo Superbike Slick SC2
Front brake: Brembo Racing double disc brake, T-floated racing brake discs, diameter 320 x 6.75 mm, 4-piston monoblock WSBK fixed caliper GP4-PR with titanium piston, Brembo Racing RCS19x18 hand brake pump including adjustable Brembo Racing brake lever, Brembo Racing -Clutch lever (without clutch switch)
Rear brake Brembo Racing single disc brake, 4-piston WSBK fixed caliper with titanium piston, brake disc diameter 220 x 4.0 mm. Footrest system Rigid footrest system milled from aluminum, adjustable in 8 positions

Mass and weight:

Seat height with empty weight: 816 mm (lowest position), 831 mm (delivery condition), 846 mm (highest position)
usable tank volume: 17.5 l; of which reserve approx. 4 liters
Dry weight: 146 kg
Empty weight ready to drive, fully fueled 1): 171.4 kg

Standard equipment (in excerpts):

BMW Motorrad Race DTC (Dynamic Traction Control) +/- 7; EBR (Engine Brake Control) +/- 7, 4 driving modes (WET, INT, Dry1, Dry2), 2D data recording / stick logger / laptiming / GPS, 2D dashboard, 2D data recording prepared for spring travel sensors / brake pressure sensors , pit lane limiter, Launch Control, adjustable footrest system (8-way), adjustable handlebars (arrow), fork bridge with offset setting (variable with accessory pack), seat height adjustment, steering head angle adjustment (variable with accessory pack), swing arm pivot point adjustment (variable with accessory pack), HP4 Race shift assistant (Up / Down), circuit diagram already reversed in delivery state, WSBK button unit, HP Race Brake lever guard, secondary transmission variable by accessory pack (pinion 15, 16, 17 / chainring 41, 42, 43, 44, 45).

13 Pictures