Discovery – Preparations, prototypes and curiosities of the EICMA motorcycle show in Milan –

Posted on by admin

BMW patent for new hybrid vehicle

Cabin scooter and recreational bike in one

The European patent office published drawings showing a BMW electric scooter with a removable roof, seat belts and airbags.

R.oller with a roof – does it sound familiar? Sure, the unforgettable BMW C1 is immediately in the picture. It was built for just three years, from 2000 to 2003. A new BMW cabin scooter could not be called C1, however, as BMW sold the name in 2004 to the automobile manufacturer Citroën, which calls its small car that. It’s a shame, because C1 Evolution could fit in well – as a reference to the C1 and the C Evolution. It stands to reason that the concept – if it is ever implemented – will use the chassis, batteries and drive on the parts shelf of the C Evolution.

Roof construction made of carbon

The published information on the current BMW patent already reveals that a possible new cabin scooter could be equipped with a roof made of carbon fiber and an aluminum platform. Two carbon arches form the main structure of the roof. They run approximately from the driver’s foot level above his head and open onto a swiveling suspension behind the driver. Carbon offers high rigidity with minimal weight, but it also costs significantly more than aluminum.

survey

Voted 1262 times

Could you imagine using such a hybrid vehicle??

Sure, during the week to commute – well protected, even against wind and weather. And on the weekend without a security cell for an exit.

Absolutely no way. Better with a helmet and without airbags, weather protection, etc. on the bike – whether to work or on a country road tour.

read more

Propulsion of the BMC C Evolution

The C1 at the time had an aluminum roof and weighed 185 kilograms, which was a bit overwhelming for the 125 single-cylinder with 15 hp and a top speed of 110 km / h. The successor C1 200 with 176 cm³ displacement and almost 18 hp improved the acceleration values, but the top speed only rose to 112 km / h. The large electric scooter C Evolution currently available from BMW provides 48 hp, drives up to 129 km / h and has a range of 160 kilometers. So that would be useful performance data.

Manufacturer

Removable roof

The entire roof structure should be easy to remove – including winglets, safety cell with airbags, four-point belt, backrest and windshield. It seems as if BMW is pursuing a vehicle concept with this design that, for example, meets the needs of a commuter during the week and should resemble a completely normal motorcycle as much as possible for an excursion on the weekend – albeit electric.

Crumple zone, seat belt, airbags

The patent drawings provide for four crumple zones of several centimeters vertically through the brackets of the carbon roof at the front and rear (see Fig. 3, dashed lines at the numbers 40).

Bmw

The sketches foresee 4 crumple zones, designed to absorb impact energy and easily interchangeable after an impact.

A four-point belt is intended to keep the driver in the seat in the event of a collision, so that the airbags in the side walls of the cabin can effectively protect the driver. The airbags should reach from the hips up to the shoulder and up to the elbows on each side. The reinforced back area on the detachable cabin is intended to protect the spine in the event of a rear-end collision, and inflatable cushions are also provided in this area.

Winglets against sensitivity to cross winds

The roof construction provides more protection against injuries in the event of an accident as well as against wind and rain, but aerodynamically – especially in crosswinds – it creates challenges.

Bmw

4 movable winglets on the roof structure should ensure stability in spite of cross winds.

For this purpose, BMW provides four movable winglets in the patent drawings: In conjunction with an electronic stability system, two winglets at the front and two at the rear provide downforce. At the same time, they could act like the ailerons on an airplane. The small, moving components would constantly align themselves in such a way that they counteract the tilting forces generated by the cross winds and thus stabilize the vehicle.

And what about a pillion passenger?

With the C1 it was possible to take a passenger with you, but only in theory. The passenger had to take a seat outside or behind the cabin. And then of course wear a helmet. Very few have made use of this option to take them away. The current drawings suggest that there is no space provided for a passenger in this cabin vehicle, and certainly none that is located inside the safety cell. It could look different if the roof is removed. We the "completely normal" Outdoor bike could then already be space for a pillion passenger.

Conclusion

BMW is obviously serious about this idea. The first patent for this was applied for in 2019, this is a removable roof for the C Evolution electric scooter. 15 new patent documents show that the concept has developed considerably since then.

Related articles

Related articles

Leave a Reply

Your email address will not be published. Required fields are marked *