Menus
Theme special
Everything about BMW Motorrad
Custom Works Zon
14th photos
Custom Works Zon
1/14
The Japanese customizer Custom Works Zon has grabbed a BMW K1600 excavator …
Custom Works Zon
2/14
… and built a veritable custom bike from it.
Custom Works Zon
3/14
The dark BMW creation goes by the name of Stealth Crow.
Custom Works Zon
4/14
The conversion is designed so that it can be completely retrofitted.
Custom Works Zon
5/14
The frame, running gear and engine of the K1600 excavators remained untouched.
Custom Works Zon
6/14
The built-in carbon lining parts act like a monocoque.
Custom Works Zon
7/14
The original cockpit instrument was installed in front of the driver.
Custom Works Zon
8/14
White lines on the exposed carbon fiber should be reminiscent of old BMW models.
Custom Works Zon
9/14
This is where you start or stop.
Custom Works Zon
10/14
The tank filler neck sits behind the driver’s seat.
Custom Works Zon
11/14
The Stealth Crow is designed as a single seater.
Custom Works Zon
12/14
Tubular handlebar in classic M-shape.
Custom Works Zon
13/14
The rear wheel can present itself free-standing.
Custom Works Zon
14/14
The two rear silencers are located on the left and right of the rear wheel.
Custom Works Zon Stealth Crow
I was a BMW K1600 B
The Japanese customizer Custom Works Zon grabbed a BMW K1600 excavator and built a veritable custom bike from it.
D.he Japanese customizer Custom Works Zon has also been a household name among European customers since the presentation of the Departed study on the new big boxer from BMW. With the Stealth Crow, which has now been presented, which again spans a large BMW engine, the Japanese are pushing on another spectacular project.
Can be completely retrofitted
The approach to the Stealth Crow was simple. The conversion should be completely reversible, so that every customer can restore their K1600 to the standard condition and the conversion can also be offered as a complete kit. It’s hard to believe when you look at the Stealth Crow.
As with the production bike, the visual focus is at the top at the front. New carbon fiber laminate panels that look like a monocoque stretch from the round headlights at the front to the driver’s seat and down to the fairing keel. White lines on the visible carbon mat structure are reminiscent of old BMW models. The rear wheel is allowed to present itself freely, only a license plate arm, which integrates the rear light and the indicators in a minimal form, starting from the swing arm pushes into the picture.
Six-cylinder remains untouched
The original cockpit instrument was integrated into the dummy fuel tank in front of the driver. The filler neck sits behind the driver. An M-shaped tubular handlebar was mounted on the upper fork bridge. The mirrors moved to the ends of the handlebars.
Custom Works Zon
The 1,649 cc in-line six-cylinder with 160 hp and 175 Nm torque was taken over unchanged. He is allowed to exhale through two short rear silencers that open out on the left and right in front of the rear wheel. For the sake of appearance, the front fork and the entire cardan drive were polished to a high gloss.
Related articles
-
Hookie Co. BMW R nine T: Custom bike from the kit
HookieCo 16 photos HookieCo 1/16 Hookie Co. from Dresden has developed a custom bike kit for the BMW R nineT in which the design elements can be…
-
Birdcage BMW – New retro boxer in a custom look
BMW 45 photos BMW 1/45 Customizer Revival Cycles from Texas is building a custom bike around the new BMW Cruiser Boxer. Instagram pipeburn and…
-
New BMW Cruiser boxer engine 2019 custom bike
BMW 20 pictures BMW 1/20 The Custombike Departed has now been presented in Japan. BMW 2/20 was built by the custom bike manufacturer Custom Works Zon …
-
Comparison test Harley-Davidson Sportster 1200 Custom against Yamaha XVS 1300 A Midnight Star
Jahn comparison test Harley-Davidson Sportster 1200 Custom against Yamaha XVS 1300 A Midnight Star Through thick and thin Better a fat Japan cruiser …
-
Bad Winners Motokit: Custom conversion kit for Ducati Scrambler
Bad winners 13 photos Bad winners 1/13 A Ducati Scrambler in a custom outfit desired? Bad winners 2/13 Bad Winners from Paris offers ready-made…
-
Triumph Bobber TFC: Noble factory custom bike
Motorcycle fair in Milan EICMA 2019 Presented by Jorg Kunstle 36 photos triumph 1/36 Triumph introduces the Bobber TFC at EICMA 2019. triumph 2/36 TFC…
-
Custom bike Yamaha GTS 1000 Italian Resilience from FMW Motorcycles
FMW Motorcycles. 11 pictures FMW Motorcycles. 1/11 The Italian Resilience was put on the wheels by FMW Motorcycles. FMW Motorcycles. 2/11 The …
-
Tuning competition – Ducati Scrambler Custom Rumble 2018
Ducati 32 photos Ducati 1/32 ESG Rumble 400 by Sylwester from Poland (Best Ducati Official Dealer) – finalist. Ducati 2/32 Guerrilla by Giorgio from…
-
BMW works superbike, superstock HP4 and series HP4 in the test
Manufacturer 49 photos Manufacturer 1/49 BMW works superbike. Manufacturer 2/49 BMW Superstock 1000. Manufacturer 3/49 BMW Superstock 1000. Manufacturer…
-
Harley-Davidson FX 1200 Super Glide – the custom bike off the rack
Sdun In the Harley-Davidson FX 1200 Super Glide studio Harley-Davidson custom bike off the rack Content of With the FX 1200 Super Glide, Harley-Davidson…