New BMW Cruiser boxer engine 2019 custom bike

Menus

New BMW Cruiser boxer engine 2019 custom bike
BMW

New BMW Cruiser boxer engine 2019 custom bike

New BMW Cruiser boxer engine 2019 custom bike

New BMW Cruiser boxer engine 2019 custom bike

New BMW Cruiser boxer engine 2019 custom bike

20th photos

New BMW Cruiser boxer engine 2019 custom bike
BMW

1/20
The Custombike Departed has now been presented in Japan.

New BMW Cruiser boxer engine 2019 custom bike
BMW

2/20
This was built by the custom bike manufacturer Custom Works Zon on behalf of BMW.

New BMW Cruiser boxer engine 2019 custom bike
BMW

3/20
The ulterior motive: the bike should showcase the new prototype boxer engine from Bavaria.

New BMW Cruiser boxer engine 2019 custom bike
BMW

4/20
The new boxer is intended for the upcoming cruiser models from BMW.

New BMW Cruiser boxer engine 2019 custom bike
BMW

5/20
R18 could indicate a full displacement of 1.8 liters.

New BMW Cruiser boxer engine 2019 custom bike
BMW

6/20
Push rods run in chrome-plated protective tubes above the cylinders.

New BMW Cruiser boxer engine 2019 custom bike
BMW

7/20
A spark plug sits centrally under the additional head covers – we therefore assume four-valve technology.

New BMW Cruiser boxer engine 2019 custom bike
BMW

8/20
Classic final drive with cardan.

New BMW Cruiser boxer engine 2019 custom bike
BMW

9/20
The tubular steel rear swing arm carries an open cardan drive.

New BMW Cruiser boxer engine 2019 custom bike
BMW

10/20
The retro boxer relies on air-oil cooling.

New BMW Cruiser boxer engine 2019 custom bike
BMW

11/20
The seat unit was made of sheet metal.

New BMW Cruiser boxer engine 2019 custom bike
BMW

12/20
The trapeze front fork was milled from solid.

New BMW Cruiser boxer engine 2019 custom bike
BMW

13/20
The large wheels with 21 inches at the front and 26 inches at the rear are milled from aluminum.

New BMW Cruiser boxer engine 2019 custom bike
BMW

14/20
The Departed was built by Yuichi Yoshizawa and Yoshikazu Ueda.

New BMW Cruiser boxer engine 2019 custom bike
BMW

15/20
The large-volume motor hangs in this elaborately manufactured one
Frame construction.

New BMW Cruiser boxer engine 2019 custom bike
BMW

16/20
Departed won the “Best of Show Motorcycle” award at the Hot Rod Custom Show in Yokohama, Japan.

New BMW Cruiser boxer engine 2019 custom bike
BMW

17/20
The Departed is just a show bike.

New BMW Cruiser boxer engine 2019 custom bike
BMW

18/20
But we should see the retro boxer again soon in a BMW cruiser.

New BMW Cruiser boxer engine 2019 custom bike
BMW

19/20
The very low silhouette of the bike is reminiscent of Ernst Henne’s record-breaking machines of the late 1920s and 1930s.

New BMW Cruiser boxer engine 2019 custom bike
BMW

20/20
Yuichi Yoshizawa was delighted to work with BMW Motorrad
enormous: “It was a great honor and challenge for one of the
most traditional manufacturer in the industry to be able to build a motorcycle around the prototype of such a spectacular new boxer engine. “

New retro boxer engine from BMW for cruiser models

Debut in a custom bike

Time and again, BMW has shown that they want to go back to the cruiser segment – with a boxer engine. In Japan, the customizer Custom Works ZON has now built a bike around the new Boxer.

“Very soon, BMW is bringing an authentic, emotional cruiser,” says BMW motorcycle boss Markus Schramm in an interview with MOTORRAD. And it will probably have a completely reinterpreted boxer engine. What the cruiser customers can expect in terms of motors, the Bavarians show in advance embedded in a custom bike. The Bavarians commissioned the Japanese motorcycle manufacturer Custom Works ZON to build a machine based on the new type of boxer engine. The Showbike Departed has now been presented in Japan.

Boxer with 1,800 cc?

The Bavarians still do not have any specific information about the new boxer, but the first pictures already provide ample evaluation basis. While the recently introduced ShiftCam boxer is packed full of innovations, the new retro boxer is obviously turning to design features that are far back in the past.


BMW

Very soon we could see the new boxer in a cruiser model from BMW.

Both the external geometry and the visible elements, such as the push rods running in chrome-plated protective tubes above the cylinders are reminiscent of the boxer engines that were built by BMW until the end of the 1960s. The project designation R18 could indicate a full displacement of 1.8 liters. Further covers with centrally located spark plugs can be seen under the milled covers of the customizer. We therefore assume a four-valve engine. The push rods running at the top also indicate a camshaft located at the top of the engine housing. Air-oil cooling is contemporary. Carburettors are installed on the show bike, but for series production the two-cylinder will use an injection system. With similar design features, Harley-Davidson achieves around 90 hp and a good 150 Nm of torque. BMW shouldn’t be less, more likely.

The first cruiser model with the new boxer should be presented in late 2019 and hit the market in 2020. With the new giant boxer, BMW has its sights primarily on the US market.

Japanese custom style

The new prototype boxer was packed in a custom bike with a classic shape and lots of craftsmanship
in the detailed solutions – all in the highest Japanese quality. The very low silhouette of the bike is reminiscent of Ernst Henne’s record-breaking machines of the late 1920s and 1930s.


BMW

The custom bike has the "Best of Show Motorcycle" won at the Hot Rod Custom Show in Yokohama.

The large wheels with 21 inches at the front and 26 inches at the rear are milled from aluminum and fitted with relatively narrow tires, and the trapezoidal front fork is also milled from solid. The tubular steel rear swing arm was attached to the tubular space frame with hidden suspension. The large-volume motor hangs in this elaborately manufactured frame construction. The integrated tank, the seat unit and the front paneling are made of sheet metal by hand. Departed, formed by Yuichi Yoshizawa and Yoshikazu Ueda, won the “Best of Show Motorcycle” award at the Hot Rod Custom Show in Yokohama, Japan.

Leave a Reply

Your email address will not be published. Required fields are marked *